Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services

Computer Hardware Course – The Advantages of Taking It

Computer hardware courses are an excellent way to learn how to manage the inevitable computer failures that you will encounter as you find yourself hanging on your computer more and more everyday. While you do have the option of taking your computer to the service center it can cost you a lot of time and money. Your computer hardware course is invaluable for helping you understand the hardware requirements for your computer that will be enable you to jump to the rescue instead of trudging along to the repair shop.

It does not take an engineer or a technician to be successful in learning about computer hardware. If you are interested in engineering or technician positions however, a background in computer hardware can make you a far more valuable person in your field and can enhance your employability tremendously.

To troubleshoot your computer you can do very well with a simple computer hardware course. You can become your own specialist and forgo spending the money on an IT specialist.

The time invested in a computer hardware study program will pay off quickly when things go wrong. But, this is not the only reason taking a computer hardware course would be a good plan.

Not only will you be able to fix your computer, but you will have the knowledge to build a computer from scratch. The cost of computer parts is often far less expensive than buying a pre-made package. You will also be able to customize your computer so that it is perfectly designed for your needs.

By avoiding the cost of labor from the computer store you will have a far less expensive computer that is perfect for you. You will also no longer need to worry about taking your computer in for repairs as you will know just how to fix what goes wrong.

Computer knowledge is in high demand no matter what career you are involved in. With the information you learn in a computer hardware course you will be able to take on an IT position. Such positions are in high demand as a limited number of people have the knowledge to take on an IT role.

The time needed to take a computer hardware course is well worth the investment. Learning about software and programming can only make you even better with your computer goals. If you are limited in time, not to worry. Many courses are available online or on CD for you to do at home.

Take some time to discover exactly what will be covered in your course. The computer technology field is huge, so you will need to focus. You will never be able to learn everything about computer hardware in a single course. It takes a lifetime of study to learn, and with technology constantly changing you will need to continuously work on keeping your knowledge up to date. A computer hardware course will bring you a chance to get ahead of the game and keep up with your own computer.

Louis Zhang, computerhardwarecute dot com

Posted in general | Comments Off on Computer Hardware Course – The Advantages of Taking It

Schedule Slippage – Root Causes

“The single most important task of a project: setting realistic expectations. Unrealistic expectations based on inaccurate estimates are the single largest cause of software failure.”- Futrell, Shafer

Introduction

With global and competitive market, it is very important to launch a product or service in the market on time, ahead of competitors. Definitely, timely launch depends on on-time-completion of the product development projects. Project planning has lots of challenges to overcome in order to finish the project on time – right from schedule predictability, envisioning future/possible risks and coming up with mitigation plans.

This article talks about some of the challenges, often faced in the Software Product Development industry that causes the schedule slippage.

Schedule slippage: Delay in the project completion from its initial estimated date of completion.

Each project plan will have a planned completion date (NRA, RA), and a bounding box or upper limit in schedule. Nowadays, it is a common practice to have three dates associated with any project plan:

  • Non-Risk Adjusted (NRA) date: Project completion date assuming no hurdles – Ideal conditions.
  • Risk Adjusted (RA) date: Project completion date assuming some risks will come on the way and will need extra time to attend to them.
  • Bounding Box (BB) or upper limit: The upper limit on the project plan before which the project has to be finished under any circumstances – Generally decided by the top management based on product/services roadmap and launch in the market.

Under ideal circumstances, any project is scheduled to complete by NRA date. Considering some risks that may come on the way and would eat some time off the schedule, the project should be over by RA date. If the risks were not envisioned and hence not planned well, then project may get delayed and would complete after RA date. Project completion crossing the RA or upper limit is neither good nor expected out of a well-planned project.

Root Causes

As we always plan for a project to get over before RA date, seldom is the case it happens as expected. There are multiples reasons for schedule slippage, right from improper planning, lack of resources to unplanned requirements and rework that eat away vital time off the planned schedule.

A typical project development process – Each project will have a team (development, testing and other functions) that will work through a process (requirement analysis, schedule estimation, design, implementation and testing) to deliver a product to the customer/end user. Each entity that participate in the project – directly or indirectly affect the schedule.

From the development process, we can identify the items that can cause delay in the execution of the project – for example, misinterpreted or unclear requirement adds up to completion time, unavailability of development tools or resources can prolong the project duration. Various processes like schedule estimation, detailed design and product development if not executed skillfully, may significantly blow up the project cycle.

For better understanding all these possible causes that may result in schedule slippage are categorized .

Let’s have a detailed look at the root causes of schedule slippage category wise.

1) Schedule Estimation: “The key is not to prioritize what’s on your schedule, but to schedule your priorities.” – Stephen Covey

For a project to be executed on time, it is very important to have it planned very well. Any mistake in project schedule estimation reflects as delay in the project completion from its deadline. There are several factors that contribute to improper schedule estimation:

· Underestimation of technical complexities: At the start of the project, many of the team members may not have thorough knowledge of technical complexities and hence their estimation would be incorrect. Sometimes it may so happen that the person giving estimates for a particular task is having no idea about the technical challenges involved in carrying out that particular task. You might hear, towards the mid/end of the project life cycle when the task is not finished on time – “Oh, I didn’t know that this feature also requires 5 more tasks to be done!” or “I was thinking this task to be so simple, but I under estimated it!”. · Lack of Design/Big picture: It is important to have a bigger picture / overview of the complete project to understand how a particular module/feature would fit in to complete project. Product or system level design helps in understanding the interfaces among other modules and the required coordination for product assembly and hence, a better insight into the work involved. Often, estimates without focus on detailed design tend to deviate more from the actual time taken for finishing the job. · Integration Testing: While making a project plan, testing also needs to be accommodated in the schedule. At times, the unit testing or testing done by individual contributors on their module is taken into account but not the system level testing. Toward the release, when all the individually tested modules are brought together, a system level or integration testing is a must. Having the time for integration testing not accounted in the overall project schedule will cause delay in the project completion.

· Unplanned dependencies: Project planning is not only about breaking the project into minute tasks and managing them. A well-planned project schedule also needs to consider certain unplanned dependencies. Some of these are:

o People: Optimum utilization of human resources calls for same set of people working in multiple projects. A person may not be available to work for currently planned/assigned project due to extended/unplanned work in another parallel project. Another issue related to people could be unplanned/unexpected attrition that will affect the project plan. Time is also lost in mentoring of new member by a senior (more experienced) person which goes unaccounted if not planned.

o Tools & Equipments: Project can be delayed if team is waiting for release of upgrade or procurement of any vital tool (hardware or software being used in the project) or if the equipments required for development and testing are not available. “We had a 3-months project for validating our existing solution on new product platform using customer DUT (device under test). We had to wait for the DUT for nearly 1.5 months as it got stuck in customs. After getting the DUT, we realized that it’s been damaged partially during transportation. As a result we had to ask for another DUT and whole project took more than 5 months to get finished.” – I am sure that such cases will be quite familiar to many organizations. Other reason for timely unavailability of tools / equipments is that they are shared among various projects to reduce the operating cost. Any unplanned dependency on their usage or wrong assumption about availability of these shared resources would cause delay in the program. Team members might have to work on shifts to optimize the usage of shared resources which can cause reduced work hours and/or productivity loss and results to schedule slippage.

“I was waiting for Matlab license to be released by another person in the team but he left the office without doing so and I lost 3 hours figuring out what to do?” – is it something you faced before?

o Other programs: If multiple programs have deliverable dependencies, then delay in one project will have cascaded effect on other projects, which directly or indirectly depend on its deliverable. “We got delayed because we had to wait for a critical UI component from the framework project team” or “We didn’t plan for bug fixes for a component which was supposed to be delivered defect free for our usage” are the common scenarios for delays in program which are dependent on other program deliverables. Parallel programs may affect the schedule of your program in a different way as well – Sometimes, management changes the priority of the programs running in parallel. If your project is considered as a low priority one then there might be lack of resources assigned to your project that may result in schedule slippage.

· Beta releases: How many times we seek feedback on our product during development? And how often we allocate time for it? It’s important to plan beta releases if we desire to have our product validated by expert users or lighthouse customers during development. Getting feedback from beta customers becomes important especially when their requirements echo that of a mass customer base. Process of giving workable releases to customers, collecting their experience, having their feedback analyzed, and then incorporating in the final product version takes significant time.

· Risk mitigation and plan B: Every project will have some or the other risks. These risks can be of varying severity and probabilities. While making project plan, it is important to treat the risk individually based on their severity and probability of occurrence. If high probable risks with higher severity are not planned with their mitigation plan (or plan B), they will have huge impact on schedule deviation from planned one. As in one of the previous examples quoted, getting a DUT on time for validation was a risk. Had there been a mitigate plan (plan B) like – Validate with other DUT or if DUT is not available here, let one developer travel to customer’s place and finish the validation on time, the schedule slippage would have been avoided.

2) People: Ultimately, projects are executed by people who may not be skilled or talented. Hence, looking for perfection in projects involving human beings may not be a feasible thought. Certain unpredictable and hence unavoidable issues under this category are:

· Poor leadership: Before thinking of project execution, it is project planning that actually would set the platform of success. Execution of the project depends on its team while planning is taken care by the project leader. The project leader is expected to have enough technical know-how to understand the project goals and to the details of the tasks involved. Poor leadership and superficial knowledge of assignments often results in invalid effort estimation and ad hoc task delegation causing stress and possible delay in project execution. People leading the team are also responsible for keeping the team spirit and motivation level upbeat. Poor personal commitment due to lack of motivation results in loss of productivity and may cause schedule to slip. Another reason that adds up to delay in projects is inability of leadership team to track the schedule progress and take the correction action.

· Attrition: If the project duration is large and job market is hot, it may be difficult to retain people in the project till its completion. Attrition may further delay the completion especially if the person leaving the job was in critical path. A person leaving the organization would leave a gap in the project that a new person may not fill immediately, which in turn causes sudden reduction in the task force.

· Learning curve: When ever a new person or team member is included in the project, he or she may require some time to understand the project to keep in pace with other members. Learning curve is needed for new team members, joining the team either due to attrition or due to any specific technical competency requirement. · Context switching: In smaller organization or groups where people work on multiple projects simultaneously, it is important to have some buffer for context switching. A person planned to work in project ‘A’ for two hours after a gap of two weeks, would take more than scheduled time to complete that task. Gap of two weeks and the fact that he or she was involved in other project would require some time for the member to get back to the context of current project. · Global development teams: In an era of globalization and outsourcing, it is common these days to have development team distributed over different geographical regions. Project plan needs to account for different time zones and working culture. You might expect an input for your task on Monday morning your time but it may be Sunday late evening for that person and finally when the input arrives, you might be on your way to home after work.

Sometimes schedule estimation might go completely wrong if you have not understood the work culture of the region your teammate belongs to – “In my previous work, I was given a task to be completed with a heads up that its very critical task and needs immediate attention’. When I asked my project lead how many days/hours I have for it, I had been time for 2 weeks for high priority and ‘immediate-attention’ work.” Definition of ‘urgent’, ‘high priority tasks’ changes with culture and region.

· Communication Issues: People communicate differently. If important issues are not brought to the notice of the team members, or are not escalated on time, the entire project may suffer. Often fear of embarrassment stops team members from reporting issues faced during execution leading to more time being spent on that task that can easily be executed additional help.

3) Customer Involvement: These issues are quite serious if customer or end users of the product are involved in the development phase. Understanding customer’s priorities, defining your expectation from their involvement needs to be clear and in agreement with both the parties.

· Expert user testing: In the beginning of the project, expert user testing cycle needs to be planned. Process of giving builds or releases for testing and collecting their feedback, analyzing and incorporating them in your product takes significant time which, if not planned, can delay your program. · Timely feedback: “I got feedback from customers for features, delivered in development milestone-1, after milestone-5 towards the release. These feedbacks are critical but now I am worried how to incorporate them without affecting the schedule.” It sounds like a common problem. Incorporation of feedback from customers needs to be planned well taking a commitment from the customer. · Product requirement specification review: Having a product requirement review planned and executed will keep you on right track throughout the project. Reviewing the requirement specification will avoid requirement related defects fixing which otherwise would have delayed, the project.

4) Ambiguous Project Requirement: For any project to be initiated, the first thing is to have requirements for it. In the product development life cycle, requirement phase acts like a foundation. Clear requirement or vision for the project navigates the team to success. However, requirements may not be clear at the time of estimation and may result in delay in the project completion. Issues related:

· Evolving specs: If you are making a product based on a standard which is not yet matured or still evolving, you are more prone to have this risk. Frequency changes in the specs will change the requirement for the project during different stages of product development and team will continue to work on something that is not yet evolved. This results in rework that would delay the project if time for dealing with these changes is not accommodated in the schedule. “We developed an algorithm and hence measurement that was based on certain industry standard. Towards the release of the product, the specs changed and our measurement was no more valid. We had to redo the algorithm to reflect the changes in the specs. This caused our product release delayed by 2 months.” · New requirements: Sometimes new requirements are added as the project evolves towards completion. Implementation of new requirements is not planned at the beginning of the project and hence is not accounted in schedule. Adding new feature without revising the schedule may result in delay.

· Untold expectation: Requirements from the customers may be of two types – implicit or explicit. It is important to have the requirements well documented. Implicit requirements needs to be better defined and documented to avoid any confusion towards the end of the project. Customers may not describe their requirements related to system performance, memory issues, user interface quality and usability but they are very keen on providing feedback in those aspects once the product is given for expert user testing. If we are not clear about such requirements, out design might not address them. Addressing them towards the end of the project may call for design changes and extra work that would delay the project.

5) Unplanned Tasks / Reworks: Bounding box for the project is set by higher management and often lack buffer for unplanned task(s). Having more of unplanned task that creep up at different phases of project can cause schedule slippage. The unplanned tasks or rework may arise due to:

· Sustaining work: In smaller organizations, some of the project team may also be responsible for sustaining / customer support of existing products. These unplanned tasks, which come on event basis, related to customer support are always of high priority. Excess or prolonged sustaining work may take resource out of the planned project causing a potential threat for schedule slippage. · Defect fixes: Defects are bad as they degrade the product quality and consume extra time/effort to fix them. It is good to have testing of the intermediate releases of the project to find and fix defects sooner in the development life cycle. If the fixing-cycle for such internal-milestone defects is not planned, then either the project is either going to slip or product is going to be of poorer quality. Poor programming skill of the team, not adapting to modern programming practices and having ad hoc development processes may lead to higher number of defects which would take more time to fix then planned and cause slippage.

· Task spillover from previous milestone: Tasks that are not completed in previous milestone, due to whatever reason (inefficiency, vacation of the team member, resource crunch etc), will have to be completed in the next milestone thereby increasing the load on the team. If adequate buffer is not planned, these tasks spilled from previous milestone over to next, can delay the project. · Requirement change / refinement: Requirement changes during the product development will result in rework of what has been previously done with first version of requirement(s). Addressing changes in the requirements needs extra time and effort and may cause schedule slippage. In some cases, the requirement from customer is misunderstood resulting in wrong system design and implementation. Additional, unplanned time is lost in correcting the design/implementation which causes schedule slippage.

Conclusion

On time delivery is the challenge software development companies are facing globally. To have a complete control over estimated schedule, it is very important to identify the elements in the development cycle that cause schedule slippage. This article uncovers and explains the root causes of delay in programs using examples from real world. Having an insight to the root causes will help the program managers to make good decisions to avoid future schedule slippage.

Posted in general | Comments Off on Schedule Slippage – Root Causes

How Car Mechanics Use Technology

Do you know why it’s important to find a good mechanic or a good repair shop to repair your car? The reason: it could save you hundreds of dollars in parts and labor! When we say a “good mechanic” or a “good repair shop”, we’re referring to mechanics who are equipped with the latest technology. You don’t want to entrust your car to a shop with outdated machinery and equipment because it will take longer to arrive at a diagnosis. And the longer a mechanic takes to make a diagnosis, the larger your bill for labor!

Remember that car mechanics charge by the hour.

Car repairs can cover any one or a combination of the following (note that this is not a complete repair list).

• Air conditioning checks

• Air bag checks

• Electrical wiring

• Cables

• Clutch service and repair

• Transmission repair

• Wheel Alignment

• Suspension

• Brakes

• Heating system

• Oil and lubrication

• Battery

• Power windows

Much of the troubleshooting that mechanics use to diagnose a problem is facilitated by car repair technology.

Ever noticed how some lights on your panel come on when something’s wrong? In most cases, an experienced mechanic will know immediately what the problem is, but there are instances where it will take sophisticated technology to lead to an accurate diagnosis.

Sophisticated technology comes in many forms and one popular one is troubleshooting software. Companies like Auto Tech have a software program that car owners can use to find out what is ailing their vehicle.

Most car owners who were cynical about software programs before should seriously consider purchasing a reliable car troubleshooting software program. For instance, some programs start out by asking you to input your car make and model number, the year of the car and what kinds of equipment it has. The software features a large database of information about all cars in the market and a car owner simply follows the steps when prompted. It employs what the industry calls a “tree diagnosis” where logical steps take you through the entire diagnosis process.

After you’ve keyed in your car’s profile, you use the drop down menu to choose the symptoms that your car is exhibiting. For instance, if you choose “squealing brakes”, the program mimics the squealing of brakes and if that’s the sound you hear, you confirm it and the program recommends a series of steps.

You may not really want to use a troubleshooting software, but imagine how much time and money you could save if you spoke to the mechanic intelligently, letting him know that you’re in the know.

Students who are studying towards certification buy certain tools of the trade. A couple of examples are Snap On and Mac Tools. These two are the most popular in the United States and Canada.

Mechanics now have a wide range of technology tools to help them understand car problems better: digital multimeters (electronic measuring), boroscopes (testing heat exchangers), fuel diagnostic testers (testing and balancing fuel injectors) and other such new technologies.

New car mechanic technologies help shorten the learning curve and speed up diagnosis so that the car owner isn’t saddled with too many labor hours.

Posted in general | Comments Off on How Car Mechanics Use Technology

Can You Upgrade a Maya Student Version to a Full Commercial Edition?

The Maya 3D software from Autodesk has long-been a staple tool for the production of the highest level of Visual Effects and animation for Oscar-winning blockbuster movies, TV shows and video games.

Students who are looking to secure themselves commercial work upon graduation these days typically need to show some familiarity with this software…ideally the more the better, since most companies these days use Maya as their main software package, and many have it deeply integrated into their own proprietary pipelines and tools – meaning that the situation is unlikely to change for the foreseeable future.

Students who take the opportunity currently afforded them of purchasing a copy of the Maya Student Edition do well since they are able to improve their skillset on the full Unlimited version of the software, and do so at a huge discount (the student edition typically retails for around $350).

However, a number of students wonder if they also qualify for a discount later on if they wish to upgrade to a full commercial edition of the Maya software. Jumping from graduation to commercial work can be a challenge, so any way to alleviate the expense of setting yourself up as a freelancer is more than welcome…but can it actually be done?

Upgrade Maya Student Edition To Commercial License?

Yes, you’ll be pleased to know that there is a program available where current owners of a Maya student license are able to upgrade to the full commercial license at a massive discount of around 60%…in other words, a full commercial license of Maya would typically cost around $3,900, but student license holders are able to upgrade their current license to a full commercial one for just $1,300.

This is huge, and can be a real lifesaver for folks who want to go it alone and start their own freelance business but are wary of the huge costs involved.

In fact, if you’re smart about it and don’t mind a little negotiation, the license could even be purchased with a down-payment from your first client before you even begin working on their project.

Such a huge discount on the student to commercial upgrade is a great incentive for students, especially at this economic time, and it also makes purchasing the Maya student edition in the first place a sensible option, since you get access to these kinds of discounted upgrades.

Posted in general | Comments Off on Can You Upgrade a Maya Student Version to a Full Commercial Edition?

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

How to Fix an Error Accessing the System Registry Easily

The system registry is an important component to practically every computer, and it would actually be considered a pile of electronics if the system registry was not included. It is essential for computers based on Windows, since it is the storage location for the hardware, software, and pretty much everything that makes the computer run.

Changes and updates go directly through the system registry for storage, but sometimes things do not always go as smoothly as we wish. Not many know what to do about an error accessing the system registry, but it must be fixed in order to keep your computer running.

An error accessing the system registry is not very uncommon, and it usually occurs when old files or updates are still located within the registry. The error can occur when new updates are downloaded, new programs installed, or even when new software is being added to your computer. A window will usually pop up stating “error accessing the system registry” and not much can be done until the error is fixed.

It can result from old updates being left in the system, or even old files that were not deleted when a download or installation was incomplete. The best way to get rid of the error accessing the system registry is to find out the problem, get rid of old files, and start fresh with new updates and software to keep your computer running smooth.

Because the error accessing the system registry can occur for a number of different reasons, it can sometimes be hard to locate the specific problem. The first step is to determine what exactly triggered the error, such as a new download, new software being installed, or updates occurring to current software on the computer.

The error is most common when updates occur or when updated software is installed, since most likely older versions are still being kept within the registry. In this case, the error accessing the system registry can be easily correct. First off, the installation or update needs to be stopped. Then the system registry can be accessed by the computer owner, and software can be purchased or downloaded to fix this problem.

One of the best options for getting rid of an error accessing the system registry is a registry fix program, since it goes in and does all of the work for you. Rather than trying to find the damaged files and delete them yourself, the program knows exactly what to look for and get rid of for the error to go away.

Not only will a registry fix help to get rid of the problem occurring now, it can even help to get rid of any files and old updates that may cause problems in the future. It is beneficial for clearing your computer of any unnecessary files or programs that may be causing it to run slow, and can even prevent an error accessing the system registry in the future.

A registry fix program can either be downloaded online or purchased at an electronics store, and is a great way to fix an error accessing the system registry. It does all of the work for you, and can even improve the overall performance of your computer. It can get rid of old files, partial updates, or even programs that are no longer needed, and is perfect for fixing your error accessing the system registry.

Posted in general | Comments Off on How to Fix an Error Accessing the System Registry Easily

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice

Application Software in Business Activities

Business is any activity undertaken by an individual or a group of person with an intention to make profits. A business engages in various activities like planning of resource, scheduling of activities, coordinating and other managerial activities. All these have to be completed in time in order to generate maximum profit in the production. Prospective entrepreneurs should adhere to these objectives.

Much of business time is put waste when it handles its tasks through the use manual system. This necessitates to the use of the software, an automated means which is efficient-oriented. Examples of the software in business application include the Decision Support System, Transaction Processing system and Management Information System. They can be largely used in resource planning where an enterprise defines way to achievement.

Collaborative resource planning software provides the business people with adequate and reliable information. Marketing information and bureaucracy of the enterprise is unambiguous. Previous methods that contributed to the failures can be fully noted. This enables the enterprise to opt to use other successful means in use elsewhere. An efficient resource planning software helps you to generate and retrieve information about resource allocation in form of detailed niche reports. As a result, time as a resource is much conserved and can be used in other productive areas.

Boundaries are clearing defined by the software. The business is expected to work towards the laid limits by the legal authority, operational, technical, economic and social feasibility. Beyond the predetermined extents, no productive operation can be encountered.

Scheduling of activities is best in practice via use of the software. The order and the way in which operation is accurately developed by use of the program, this results into application of qualitative business techniques, where there is matching of skills and jobs to done. The enterprise standards of performance are maintained. Cases of underemployment or over employment are eradicated. In turn, employees’ are encouraged to exercise creativity and innovation in right of their propelling positions, and hence works towards achievement of objectives of the business.

Planning software makes efficient forecasting of resources. Unknown future is determined prior. Situations like inflation, competition increases government provision of subsidies and technological changes can be adequately known. The fallout is to relay strategies to deal with upcoming challenging matters.

Top echelons (management) benefits significantly in software application. Executives’ unstructured decisions are accurately established. They rapidly derive information from the software. For example, decisions on where to establish a new firm or a branch, whether there is funds to finance multiple projects.

Management need to store information in reliable source (in software). This is used for swift evaluation of business performance. They can decide to reward the best performing employees based on the results retrieved from the software. This motivates employees to work zeal and confidence. Their individuals objectives are harmonized to entire business objectives.

Managers use software to control the progress of activities. Those deviating from the predetermined plans can be precisely noted. Management can also rely on software for marketing of its products. Research on business competition like advertisement and efficient market penetration means is done in detail.

In conclusion, software suitable for effective planning of the business operations, scheduling of activities and other managerial activities. Without use of software, a business is considered to be running behind technology and operating at obsolete level.

Posted in general | Comments Off on Application Software in Business Activities